Wednesday, November 9, 2011

How To Properly Move Your Refrigerator When Cleaning

Cleaning is always a challenge. But when there are big and bulky appliances getting in your way, this becomes even more difficult. One of the areas that are normally neglected when homeowners clean their house is the area around the refrigerator. Spicy the refrigerator out of the way can be taxing.

But this is a must if you don't want dust and cobwebs to gather around the fridge. Not only is this unsanitary especially to an appliance that shop your food, this also speeds up the deterioration of your fridge.

Four Door Refrigerator

Here is a guide on how to properly move your fridge so you can clean it and the area around it:

Step 1: Unplug the refrigerator. Open the door and place a chair close to the door to preclude it from closing. Remove the contents of the fridge and neatly invent them on the table or the kitchen countertop. Make sure you place perishable goods in a cooler to preclude them from contacting bacteria.

Step 2: Once you have already removed the food and contents of the fridge, Remove the compartments next. Take out all the portable parts of your refrigerator.

Step 3: If your fridge is a no-frost fridge, you can promenade to the next step. If it is not, you should allow it to de-frost first as water can leak from the appliance. To speed up the defrosting process, use an galvanic fan to melt the ice deposits. Use an absorbent towel to Remove the water inside.

Step 4: Use cords to tie the door shut. Although the magnetic materials of the door will gather it, it is still good to use cords to seal it shut. Fasten it around the fridge. Do not use masking tape or duct tape as this might damage the enamel or the slippery terminate of the appliance.

Step 5: Ask person to help you out. Slightly tilt the engine backward so your helper can slide floor covering under it. You can pull the floor covering with the fridge on top of it unmistakably if you are using smooth flooring. However, if you already have floor covering to begin with, you should slide plastic sheets underneath and slide it while the fridge is on top. While you are pulling it away from its place, person should hold the fridge and push it a diminutive bit.

Step 6: Now clean the area with a vacuum cleaner. Also get rid of the cobwebs found at the coils of the appliance. Make sure you clean the interior and exterior of the fridge before sliding it back to its place.

Step 7: Remove the cords and place the contents of the fridge back again.

How To Properly Move Your Refrigerator When Cleaning

s510 scanner linksys wusb300n emachine netbook

No comments:

Post a Comment